Sound-deadening

The flash-banding used in a previous post was only ever going to do so much when it comes to sound-deadening. This, combined with a change of approach when it comes to carpet-lining, has left me with a need to do a little more to dampen the echoes of an empty van.

Dynamat in it's various forms has been around for a number years and seems to be de rigueur when it comes to lining the inside of a vehicle. I started reading up on sound-deadening on both the Caddy2k forum and the Edition38 forums to see what products others have used and how they applied it. The only downside of Dynamat - the cost.

My next port of call was eBay to see what sort of prices could be found on there. Pretty good, but after a little more searching and calculating price per square-foot, a car audio company selling on Amazon worked out the best.

I ordered five sheets of 18" x 32" Dynamat Xtreme - which is mainly used for car boots, doors and floors. This is to be used for the rear wheel arches and side panels. I also ordered several metres of an un-branded (and slightly thinner) version for the rear floor.
Easy to cut and apply, with a bit of pre-planning the Dynamat goes on in minutes:

A quick tap of the panels and the difference is instant; from tink-tink to thonk-thonk. Getting in and closing the doors no longer feels like getting in an empty van. More on the sound-deadening on the floor coming soon...